Install Anbox in openSUSE Tumbleweed

How to install Anbox  in openSUSE Tumbleweed (

without snap )

Anbox from the snap package can be slow depending on your hardware . Here are some steps that i found to install and use Anbox with native rpm packages on openSUSE Tumbleweed and Leap (possibly) .

1. install kernel-default , anbox , properties-cpp from repo
&nbsp &nbsp https://build.opensuse.org/project/show/home:munix9:test
2. Reboot openSUSE with the newley installed kernel-default .
2 . Load some kernel modules
&nbsp &nbsp sudo modprobe ashmem_linux && sudo modprobe binder_linux
3. Download latest android image from https://build.anbox.io/android-images/ and put it as /var/lib/anbox/android.img .
4. After that
&nbsp &nbspsystemctl enable --now anbox-container-manager.service and then systemctl --user enable --now anbox-session-manager.service .
5. start anbox from the terminal using
&nbsp &nbspanbox launch --package=org.anbox.appmgr --component=org.anbox.appmgr.AppViewActivity .

Comments

Post a Comment

Popular posts from this blog

Install Waydroid in openSUSE Tumbleweed

To test the Android 11 version of Waydroid with native-bridge included in openSUSE TW, follow the instructions below 1.Add Dead_Mozay's Waydroid repo on OBS : sudo zypper addrepo https://download.opensuse.org/repositories/home:Dead_Mozay:waydroid/openSUSE_Tumbleweed/home:Dead_Mozay:waydroid.repo    refresh the package list : sudo zypper refresh  2. install libgbinder1,libglibutil1,waydroid,python38-gbinder,python38-pyclipper (install python packages according to your python version) packages by  sudo zypper in libgbinder1 libglibutil1 python38-gbinder python38-pyclipper waydroid 3.Install anbox-modules dkms (step can become deprecated for kernel >= 5.18 ) :   git clone https://github.com/choff/anbox-modules  cd anbox-modules Edit binder/deps.c to add # include < linux/task_work.h >  sudo ./INSTALL.sh   4.Now, grab the latest libgbinder updates: git clone https://github.com/mer-hybris/libgbinder cd libgbinder make   make in...
Read more

Install Ubuntu 22.04 in 32 bit UEFI intel Atom and cherrytrail devices

Below i'm going to show you how to install Ubuntu 22.04 on a 32bit UEFI device (Intel Atom Baytrail,Cherrytrail etc ..) . 1 . manually copy all contents of Ubuntu iso to a fat32 formated usb drive . 2 . Download and copy bootia32.efi from the github repo and copy it to /EFI/BOOT directory of the usb drive . 3 . Make sure that a grub.cfg file is present on the drive . copy it to outside of all directories (copy it to / of the drive) . (you can search the drive for grub.cfg and copy it to / location of the drive ) . 4 . Turnoff fastboot and secureboot , reboot the device and select to boot from the usb drive . Now you can boot into the Ubuntu 21.04 live environment . 5 .Proceed through the installation and don't forget to connect to the internet or else installation will fail # linux #linux 32 bit uefi #Ubuntu 22.04 #32 bit uefi #uefi
Read more

Enable Hibernation in openSUSE Tumbleweed

 Hibernation or suspend to disk is disabled by default in openSUSE Tumbleweed . You can enable it by small work . Step 1. sudo nano /etc/dracut.conf.d/99-fix-resume.conf     add_dracutmodules+="resume" step 2. Rebuild intramfs   sudo dracut -fv   Step 3. Add this to boot command line (Yast boot loader)   resume=/dev/disk/by-uuid/<insert the UUID of your swap partition here> Now Hibernation should work !   if not    Step 4. Disable Secure boot and restart
Read more